Effect of alginate impression disinfection with sodium hypochlorite and castrol oil on Candida albicans counts and dimensional stability of the study model

Eva Elminawati Bidaya; Putri Welda Utami Ritonga

doi:10.46934/ijp.v3i1.36

Eva Elminawati Bidaya University of North Sumatra
Putri Welda Utami Ritonga

DOI: https://doi.org/10.46934/ijp.v3i1.36

Keywords: alginate, sodium hypochlorite, castrol oil, Candida albicans, dimensional stability

Abstract

Alginate is the most common used material because it is easy to use, affordable, and well accepted by patients. When impressing, alginate would be in contact with the surface of the oral cavity and saliva. It caused the microflora, like Candida albicanswould adhere to the surface so that it can cause cross-infection. Cross-infection prevention could be done by disinfecting the impression material before filling with gypsum. The main things of choosing a disinfectant is that the disinfectant material could eliminate microorganisms and affect the dimensional stability of impression material. This study aimed to determine the effect of alginate impression disinfection with sodium hypochlorite and castor oil (Ricinus communis oil) on the Candida albicanscounts and the dimensional stability of the study model. The samples of Candida albicanswas counted by colony counter andthe dimensional stability test by digital caliper. This study showed that alginate impression desinfection with castor oil had almost the same effectiveness as sodium hypochlorite in reducing the Candida albicanscounts, but dimension was changed even though the value of the dimensional changes is still within the tolerance limit.

Author Biography

Eva Elminawati Bidaya, University of North Sumatra

Department of Prosthodontics and Dentistry Student

References

Budiono, Susilaningsih E, Fatmasari D. Pengembangan instrumen penilaian kinerja keterampilan mencetak rahang bergigi teknik mukostatik. J of Educational Research and Evaluation 2016; 5 (1): 49-56.

Amalina R, Susanto D, Sunendar B. Perbandingan tensile strength, tear strength dan reproduction of detail bahan cetak alginat sintesis dengan variasi jumlah nanoselulosa dan metakaolin terhadap jeltrate. J Sonde 2018; 3 (1): 1-15.

Chidambaranathan AS, Balasubramanium M. Comprehensive review and comparison of the disinfection techniques currently available in the literature. J of Prosthodontic 2017: 1-8.

Haralur SB, Al-Dowah OS, Ganna NS, Al-Hytham A. Effect of alginate chemical disinfection on bacterial count over gypsumm cast. Original Article J Adv Prosthodont 2012; (4): 84-88.

Zilinskas J, Junevicius J, Ramonaite A, Pavilonis A, Gleiznys A, Sakalauskiene J. Viability change: Microbiological analysis of dental casts, Med Sci Monit 2014; 20: 932-37.

Nasution M. Lesi rongga mulut.1 ed. Medan: USU Press, 2018; p.49-57.

Bintari NWD, Setyapurnawanti I, Dechy NLP, Widana AAO, Prihatiningsih A. Screening Candida albicans penyebab kandidiasis oral dan edukasi oral hygiene pada lansia di panti sosial tresna werdha wana seraya Bali. J Pengabdian Kesehatan 2020; 3(1): 28-34.

Saber FS. Abolfazli N, Kohsoltani M. The effect of disinfection by spray atomization on dimensional accuracy of condensation silicone impressions. J of Dental Research , Dental Clinics, Dental Prospects 2010; 4 (4): 124-9.

Amelia AN, Suharti N, Rahmi E. Perbedaan stabilitas dimensi antara cetakan alginat yang diberi desinfektan ekstrak daun alpukat (Persea americana mill) dengan sodium hipoklorit. J Andalas Dental 2017; 78-87.

Mushtaq MA, Khan MWU. An overview of dental impression disinfection techniques – a literature review. JPDA. 2018;27:207–212.

Gandhi K. Pengaruh Desinfeksi Basis Gigi Tiruan Resin Akrilik Polimerisasi Panas dengan Sodium Hipoklorit Dan Minyak Jarak (Ricinus Communis Oil) Terhadap Jumlah Candida albicans dan Stabilitas Warna. Universitas Sumatera Utara. 2018. Skripsi.

Pisani MX, Macedo AP, Paranhos HdFO, Silva CHLd. Effect of Expeimental Ricinus communis Solutions For Denture on the Properties of Acrylic Resin Teeth. Braz Dent J 2012; 23(1): 15-21.

Sartori IADM, Bernandes SR, Soares D, Thome G. Safety and disinfection of impression materials for proffesional in prosthetic dentistry; 2020. p.4-5.

Lone MA, Zargar NM, Shahnaz, Shah UI. Effect of three different disinfection material on alginate impression by spray method. Internasional J of Applied Dental Sciences 2019; 5 (2): 181-4

Ritonga PWU. Nugraha BP. Pengaruh desinfeksi cetakan fisiologis dengan microwave dan sodium hipoklorit terhadap jumlah Candida albicans dan stabilitas dimensi model kerja gigi tiruan cekat. J Ilmiah PANMED 2018; 12 (3): 322-7.

Ahirwar A, Ramanna PK, Moyin S, Punathil S, Adars VJ, Chohan A. Antimicrobial efficacy of different disinfectant materials on alginate impression- A Comprative Study. International J of Oral Care and Resarch 2018; 6 (1): 7-11.

Pisani MX, Macedo AP, Paranhos HFO, Silva CHLD. Effect of expeimental Ricinus communis solutions for denture on the properties of acrylic resin teeth. Braz Dent J 2012; 23 (1): 15-21.

Setyaningsih D, Nurmillah OY, Windarwati S. Kajian aktivitas antioksidan dan antimikroba biji, kulit, buah, batang dan daun tanaman jarak pagar (Jatropha curcas L.). Institut Pertanian Bogor 2014.

Hanoem EH, Wahjuni W, Artini DD. The effectieness of mimba oil (Azadirachta indica A.Juss) spray Disinfectant on alginate impression. Dental J 2011; 44 (4): 187-191.

Basofi M, Fatmawati DWA, Soesetijo FA. Bacterial Colonies on Irreversible Hydrocolloid Impressing Produce after sion in Alpinia galanga Solution 2015; 3 (1): 128-132.

Trivedi R, Sangur R, Bathala LR, Srivastava S, Madhav S, Chaubey P. Evaluation of efficacy of aloe vera as a disinfectant by immersion and spray methods on irreversible hydrocolloid impression material and its effect on the dimensional stability of resultant gypsum cast-n in vitro Study 2019; 12 (4): 395-402.

Anusavice, Kenneth J. Phillips’ Science Of Dental Materials. 12ed. China: Elsevier, 2013: 171-175.

Arini SS, Saraswati I, Utomo AW, Santoso O. Pengaruh penyemprotan ekstrak daun teh hijau (Camellia sinensis) terhadap stabilitas dimensi hasil cetakan alginat. J Ilmu Kimia Dan Pendidikan Kimia 2021; 10 (1): 14-22.

Lamiah D, Parnaadji RR, Sumono A. Effect of disinfection with spraying technique 35 % betel pepper leaf boiling water and 0,5 % sodium hypochlorite on dimensional stability of casts made from alginate 2016; 3 (3): 530-5.

Zeni MA, Kristiana D, Fatmawati DWA. The effect of bay leaf (Eugenia polyantha Wight) boiling water 100% and sodium hypochlorite (NaOCl) 1% to dimensional stability of irreversible hydrocolloid impressing produce 2015; 3 (3): 555-9.

Bustos J, Herrera R, Gonzales U, Martinez A, Catalan A. Effect of immersion disinfection with 0,5% sodium hypochlorite and 2% glutaraldehyde on alginate and silicone : Microbiology and SEM Study. Int.J.Odontostomat 2010; 4 (2): 169-177.

Badrian H, Ghasemi E, Khalighinejad N, Hosseini N. The effect of three different disinfection materials on alginate impression by spray methode. J ISRN Dentistry 2012: 1-5.

Puji AY. Pengaruh perendaman basis gigi tiruan thermoplastic comfort system (Tes) dalam larutan ekstrak daun jarak pagar (Jatropha Curcals L.) terhadap pertumbuhan Candida albicans. Hasanuddin University. Semantic Scholar 2016.

Sari DF, PamaadjiR.R,SumonoA. Effect of disinfection techniques with various disinfectant solution on alginate mold results for dimensional stability. J Pustaka kesehatan 2013; 1 (1): 29-34.

Hasanah NY, Arya IW, Rachmadi P. Efek Penyemprotan desinfektan larutan daun sirih 80% terhadap stabilitas dimensi cetakan alginat. Dentino J Ked Gigi 2014; 2 (1): 65-9.

Wirayuni KA. Juniawati DNA. Teknik desinfeksi perendaman dan penyemprotan ekstrak mengkudu (Morinda Citriifolia Liin) terhadap perubahan stabilitas dimensi cetakan alginat. Sound of Dentistry 2020; 5 (1): 36-4.